Chiral Diselenophosphoric Acids for Ion Pair Catalysis: A Novel Approach to Enhance Both Proton Donating and Proton Accepting Properties.

The activation of poorly reactive substrates via strong chiral acids is a central topic in asymmetric ion pair catalysis these days. Despite highly successful scaffolds such as N-triflylphosphoramides, these catalysts either lack C2-symmetry or provide multiple H-bond acceptor sites, leading to lower ee values for certain reactions. We present BINOL-based diselenophosphoric acids (DSA) as an extremely promising alternative. Using an intertwined approach of synthesis and NMR studies, we developed a synthetic approach to DSA with up to 98% NMR yield. The obtained acids provide both very high proton donor and proton acceptor properties, a bifunctionality, which is key to catalytic applications. Indeed, first reactivity test proved the much higher acidity of DSA and its ability to initiate Mukaiyama-Mannich reaction and protodesilylation of silyl ethers. Together with their C2-symmetry, the single donor and single acceptor situation, the decreased tendency of self-association, and the straightforward synthesis with potential 3,3'-substitution, the DSA provide all features ideal for the further development of ion pair catalysis.

Reactivity of Superbasic Carbanions Generated via Reductive Radical-Polar Crossover in the Context of Photoredox Catalysis.

Photocatalytic reactions involving a reductive radical-polar crossover (RRPCO) generate intermediates with carbanionic reactivity. Many of these proposed intermediates resemble highly reactive organometallic compounds. However, conditions of their formation are generally not tolerated by their isolated organometallic versions and often a different reactivity is observed. Our investigations on their nature and reactivity under commonly used photocatalytic conditions demonstrate that these intermediates are indeed best described as free, superbasic carbanions capable of deprotonating common polar solvents usually assumed to be inert such as acetonitrile, dimethylformamide, and dimethylsulfoxide. Their basicity not only towards solvents but also towards electrophiles, such as aldehydes, ketones, and esters, is comparable to the reactivity of isolated carbanions in the gas-phase. Previously unsuccessful transformations thought to result from a lack of reactivity are explained by their high reactivity towards the solvent and weakly acidic protons of reaction partners. An intuitive explanation for the mode of action of photocatalytically generated carbanions is provided, which enables methods to verify reaction mechanisms proposed to involve an RRPCO step and to identify the reasons for the limitations of current methods.

Accelerated photochemical reactions at oil-water interface exploiting melting point depression.

Water can accelerate a variety of organic reactions far beyond the rates observed in classical organic solvents. However, using pure water as a solvent introduces solubility constraints that have limited the applicability of efficient photochemistry in particular. We report here the formation of aggregates between pairs of arenes, heteroarenes, enamines, or esters with different electron affinities in an aqueous medium, leading to an oil-water phase boundary through substrate melting point depression. The active hydrogen atoms in the reactants engage in hydrogen bonds with water, thereby accelerating photochemical reactions. This methodology realizes appealingly simple conditions for aqueous coupling reactions of complex solid molecules, including complex drug molecules that are poorly soluble in water.

Azotriptycenes: Photoswitchable Molecular Brakes.

The control of molecular motions is a central topic of molecular machine research. Molecular brakes are fundamental building blocks towards such goal as they allow deliberately decelerating specific motions after an outside stimulus is applied. Here we present azotriptycenes as structural framework for light-controlled molecular brakes. The intrinsic kinetics and their changes upon azotriptycene isomerization are scrutinized comprehensively by a mixed theoretical and variable temperature NMR approach. With azotriptycenes C-N bond rotation rates can be decelerated or accelerated reversibly by up to five orders of magnitude. Rate change effects are highly localized and are strongest for the C-N bond connecting a triptycene rotor fragment to the central diazo group. The detailed mechanistic insights provide a solid basis for further conscious design and applications in the future.

An NMR Spectroscopy View on London Dispersion in Catalysis: Detection, Quantification, and Application in Ion Pair and Transition Metal Catalysis.

ConspectusThe energetic contribution of London dispersion (LD) can cover a broad range from very few to hundreds of kJ mol-1 for extended interaction interfaces due to its pairwise additivity. However, for a designed and successful application of LD in chemical catalysis, there are still many obstacles and questions that remain. In principle, LD can be regarded as the attractive part of the van der Waals potential. Thus, considering the whole van der Waals potential, including the repulsive part (steric repulsion), the ideal solution to the problem in catalysis would be to design compatible interaction interfaces at exactly the correct distance. In the case of a self-assembled, flexible structure arrangement, entropic contributions and solvent interactions might be detrimental. In the case of a rigid catalyst pocket, steric hindrance might not allow for large substituents that are usually applied as dispersion energy donors (DEDs). For a working catalytic system, the following question arises: how is it possible to dissect the complex interaction interfaces in terms of energetic contributions? Usually, the energetic contribution of LD to catalysis is addressed by using calculations. However, adequately computing the correct energetic contributions can be extremely challenging for a vast conformational space with all kinds of intermolecular interactions. Thus, experimental data are essential for comparison or benchmarking.Therefore, in this Account, we describe our quest for detailed experimental data obtained via NMR spectroscopy to experimentally dissect and quantify LD in catalytic systems. In addition, we address the question of whether bulky substituents used as DEDs can be used in confined catalytic pockets. With the example of Pd phosphoramidite complexes, we show how it is possible to experimentally dissect and quantify the contribution of individual interaction areas in complicated transition metal complexes. Furthermore, a correlation between conformational rigidity and heterodimer preference clearly reveals that LD can only unfold its full potential in cases where entropic contributions are minimized. This finding can also explain the small contribution of LD in flexible and solvent-exposed molecular balances. In the field of Brønsted acid catalysis, we demonstrated that LD has a strong influence on the structures, stability, and populations of confined catalytic intermediates. LD is key for populating higher aggregates such as dimers. In addition, offsets between the experimental and computational results were observed and attributed to solvent-solute dispersion interactions. We studied the delicate interplay of attractive and repulsive interactions by adding bulky DED substituents onto a substrate, which can function as a molecular balance system. Intriguingly, the effect of LD on the free substrate was straightforwardly transferred onto the highly confined intermediates. Furthermore, this effect could even be read out in the enantioselectivities of the underlying reaction. This conceptualized a general approach regarding how LD can be used beneficially in catalysis to convert from moderate/good to excellent stereoselectivities. It showcased that bulky groups such as tert-butyl must not only be regarded as occupied volumes.

Brønsted Acid Catalysis-Controlling the Competition between Monomeric versus Dimeric Reaction Pathways Enhances Stereoselectivities.

Chiral phosphoric acids (CPA) have become a privileged catalyst type in organocatalysis, but the selection of the optimum catalyst is still challenging. So far hidden competing reaction pathways may limit the maximum stereoselectivities and the potential of prediction models. In CPA-catalyzed transfer hydrogenation of imines, we identified for many systems two reaction pathways with inverse stereoselectivity, featuring as active catalyst either one CPA or a hydrogen bond bridged dimer. NMR measurements and DFT calculations revealed the dimeric intermediate and a stronger substrate activation via cooperativity. Both pathways are separable: Low temperatures and high catalysts loadings favor the dimeric pathway (ee up to -98 %), while low temperatures with reduced catalyst loading favor the monomeric pathway and give significantly enhanced ee (92-99 % ee; prior 68-86 % at higher temperatures). Thus, a broad impact is expected on CPA catalysis regarding reaction optimization and prediction.

Enforced Electronic-Donor-Acceptor Complex Formation in Water for Photochemical Cross-Coupling.

The amino alcohol meglumine solubilizes organic compounds in water and enforces the formation of electron donor acceptor (EDA) complexes of haloarenes with indoles, anilines, anisoles or thiols, which are not observed in organic solvents. UV-A photoinduced electron transfer within the EDA complexes induces the mesolytic cleavage of the halide ion and radical recombination of the arenes leading, after rearomatization and proton loss to C-C or C-S coupling products. Depending on the substitution pattern selective and unique cross-couplings are observed. UV and NMR measurements reveal the importance of the assembly for the photoinduced reaction. Enforced EDA aggregate formation in water allows new activation modes for organic photochemical synthesis.

Photo enhancement reveals (E,Z) and (Z,Z) configurations as additional intermediates in iminium ion catalysis.

Imidazolidinone-based α,ß-unsaturated iminium ions are the reactive species within countless synthetic protocols in asymmetric organocatalysis. However, (E,Z) and (Z,Z) imidazolidinone iminium ions, i.e. (Z)-CC configurations, have been elusive so far. Herein we describe how in situ photoisomerization enables the observation and assignment of high energetic (Z)-configured intermediates below the detection limit of NMR spectroscopy for (E,Z) and (Z,Z) iminium perchlorate complexes derived from MacMillan's 1st generation catalyst and cinnamaldehyde. Traces of (E,Z) could even be detected under synthetic conditions at 25 °C in MeCN. Using back isomerization studies and diffusion ordered spectroscopy, conditions were found to stabilize the (E,Z) and (Z,Z) isomers for several hours via ion pair aggregation. Thus, at least (E,Z) should be considered for future investigations in asymmetric iminium ion catalysis.

Benzoates as photosensitization catalysts and auxiliaries in efficient, practical, light-powered direct C(sp3)-H fluorinations.

Of the methods for direct fluorination of unactivated C(sp3)-H bonds, photosensitization of SelectFluor is a promising approach. Although many substrates can be activated with photosensitizing catalysts, issues remain that hamper fluorination of complex molecules. Alcohol- or amine-containing functional groups are not tolerated, fluorination regioselectivity follows factors endogenous to the substrate and cannot be influenced by the catalyst, and reactions are highly air-sensitive. We report that benzoyl groups serve as highly efficient photosensitizers which, in combination with SelectFluor, enable visible light-powered direct fluorination of unactivated C(sp3)-H bonds. Compared to previous photosensitizer architectures, the benzoyls have versatility to function both (i) as a photosensitizing catalyst for simple substrate fluorinations and (ii) as photosensitizing auxiliaries for complex molecule fluorinations that are easily installed and removed without compromising yield. Our auxiliary approach (i) substantially decreases the reaction's induction period, (ii) enables C(sp3)-H fluorination of many substrates that fail under catalytic conditions, (iii) increases kinetic reproducibility, and (iv) promotes reactions to higher yields, in shorter times, on multigram scales, and even under air. Observations and mechanistic studies suggest an intimate 'assembly' of auxiliary and SelectFluor prior/after photoexcitation. The auxiliary allows other EnT photochemistry under air. Examples show how auxiliary placement proximally directs regioselectivity, where previous methods are substrate-directed.

Bidentate substrate binding in Brønsted acid catalysis: structural space, hydrogen bonding and dimerization.

BINOL derived chiral phosphoric acids (CPAs) are a prominent class of catalysts in the field of asymmetric organocatalysis, capable of transforming a wide selection of substrates with high stereoselectivities. Exploiting the Brønsted acidic and basic dual functionality of CPAs, substrates with both a hydrogen bond acceptor and donor functionality are frequently used as the resulting bidentate binding via two hydrogen bonds is expected to strongly confine the possible structural space and thus yield high stereoselectivities. Despite the huge success of CPAs and the popularity of a bidentate binding motif, experimental insights into their organization and origin of stereoinduction are scarce. Therefore, in this work the structural space and hydrogen bonding of CPAs and N-(ortho-hydroxyaryl) imines (19 CPA/imine combinations) was elucidated by low temperature NMR studies and corroborated by computations. The postulated bidentate binding of catalyst and substrate by two hydrogen bonds was experimentally validated by detection of trans-hydrogen bond scalar couplings. Counterintuitively, the resulting CPA/imine complexes showed a broad potential structural space and a strong preference towards the formation of [CPA/imine]2 dimers. Molecular dynamics simulations showed that in these dimers, the imines form each one hydrogen bond to two CPA molecules, effectively bridging them. By finetuning steric repulsion and noncovalent interactions, rigid and well-defined CPA/imine monomers could be obtained. NOESY studies corroborated by theoretical calculations revealed the structure of that complex, in which the imine is located in between the 3,3'-substituents of the catalyst and one site of the substrate is shielded by the catalyst, pinpointing the origin or stereoselectivity for downstream transformations.

Tilting the Balance: London Dispersion Systematically Enhances Enantioselectivities in Brønsted Acid Catalyzed Transfer Hydrogenation of Imines.

London dispersion (LD) is attracting more and more attention in catalysis since LD is ubiquitously present and cumulative. Since dispersion is hard to grasp, recent research has concentrated mainly on the effect of LD in individual catalytic complexes or on the impact of dispersion energy donors (DEDs) on balance systems. The systematic transfer of LD effects onto confined and more complex systems in catalysis is still in its infancy, and no general approach for using DED residues in catalysis has emerged so far. Thus, on the example of asymmetric Brønsted acid catalyzed transfer hydrogenation of imines, we translated the findings of previously isolated balance systems onto confined catalytic intermediates, resulting in a systematic enhancement of stereoselectivity when employing DED-substituted substrates. As the imine substrate is present as Z- and E-isomers, which can, respectively, be converted to R- and S-product enantiomers, implementing tert-butyl groups as DED residues led to an additional stabilization of the Z-imine by up to 4.5 kJ/mol. NMR studies revealed that this effect is transferred onto catalyst/imine and catalyst/imine/nucleophile intermediates and that the underlying reaction mechanism is not affected. A clear correlation between ee and LD stabilization was demonstrated for 3 substrates and 10 catalysts, allowing to convert moderate-good to good-excellent enantioselectivities. Our findings conceptualize a general approach on how to beneficially employ DED residues in catalysis: they clearly showcase that bulky alkyl residues such as tert-butyl groups must be considered regarding not only their repulsive steric bulk but also their attractive properties even in catalytic complexes.

Transition-Metal-Stabilized Heavy Tetraphospholide Anions.

Phosphorus analogues of the ubiquitous cyclopentadienyl (Cp) are a rich and diverse family of compounds, which have found widespread use as ligands in organometallic complexes. By contrast, phospholes incorporating heavier group 14 elements (Si, Ge, Sn, and Pb) are hardly known. Here, we demonstrate the isolation of the first metal complexes featuring heavy cyclopentadienyl anions SnP42- and PbP42-. The complexes [(η4-tBu2C2P2)2Co2(µ,η5:η5-P4Tt)] [Tt = Sn (6), Pb (7)] are formed by reaction of white phosphorus (P4) with cyclooctadiene cobalt complexes [Ar'TtCo(η4-P2C2tBu2)(η4-COD)] [Tt = Sn (2), Pb (3), Ar' = C6H3-2,6{C6H3-2,6-iPr2}2, COD = cycloocta-1,5-diene] and Tt{Co(η4-P2C2tBu2)(COD)}2 [Tt = Sn (4), Pb (5)]. While the SnP42- complex 6 was isolated as a pure and stable compound, compound 7 eliminated Pb(0) below room temperature to afford [(η4-tBu2C2P2)2Co2(µ,η4:η4-P4) (8), which is a rare example of a tripledecker complex with a P42- middle deck. The electronic structures of 6-8 are analyzed using theoretical methods including an analysis of intrinsic bond orbitals and magnetic response theory. Thereby, the aromatic nature of P5- and SnP42- was confirmed, while for P42-, a specific type of symmetry-induced weak paramagnetism was found that is distinct from conventional antiaromatic species.

Hydrogen-Bond-Modulated Nucleofugality of SeIII Species to Enable Photoredox-Catalytic Semipinacol Manifolds.

Chemical bond activations mediated by H-bond interactions involving highly electronegative elements such as nitrogen and oxygen are powerful tactics in modern catalysis research. On the contrary, kindred catalytic regimes in which heavier, less electronegative elements such as selenium engage in H-bond interactions to co-activate C-Se σ-bonds under oxidative conditions are elusive. Traditional strategies to enhance the nucleofugality of selenium residues predicate on the oxidative addition of electrophiles onto SeII -centers, which entails the elimination of the resulting SeIV moieties. Catalytic procedures in which SeIV nucleofuges are substituted rather than eliminated are very rare and, so far, not applicable to carbon-carbon bond formations. In this study, we introduce an unprecedented combination of O-H⋅⋅⋅Se H-bond interactions and single electron oxidation to catalytically generate SeIII nucleofuges that allow for the formation of new C-C σ-bonds by means of a type I semipinacol process in high yields and excellent selectivity.

Deeper Insight into Photopolymerization: The Synergy of Time-Resolved Nonuniform Sampling and Diffusion NMR.

The comprehensive real-time in situ monitoring of chemical processes is a crucial requirement for the in-depth understanding of these processes. This monitoring facilitates an efficient design of chemicals and materials with the precise properties that are desired. This work presents the simultaneous utilization and synergy of two novel time-resolved NMR methods, i.e., time-resolved diffusion NMR and time-resolved nonuniform sampling. The first method allows the average diffusion coefficient of the products to be followed, while the second method enables the particular products to be monitored. Additionally, the average mass of the system is calculated with excellent resolution using both techniques. Employing both methods at the same time and comparing their results leads to the unequivocal validation of the assignment in the second method. Importantly, such validation is possible only via the simultaneous combination of both approaches. While the presented methodology was utilized for photopolymerization, it can also be employed for any other polymerization process, complexation, or, in general, chemical reactions in which the evolution of mass in time is of importance.

Photochemical transformation of chlorobenzenes and white phosphorus into arylphosphines and phosphonium salts.

Chlorobenzenes are important starting materials for the preparation of commercially valuable triarylphosphines and tetraarylphosphonium salts, but their use for the direct arylation of elemental phosphorus has been elusive. Here we describe a simple photochemical route toward such products. UV-LED irradiation (365 nm) of chlorobenzenes, white phosphorus (P4) and the organic superphotoreductant tetrakis(dimethylamino)ethylene (TDAE) affords the desired arylphosphorus compounds in a single reaction step.

Noncovalent CH-π and π-π Interactions in Phosphoramidite Palladium(II) Complexes with Strong Conformational Preference.

The weak noncovalent interactions and flexibility of ligands play a key role in enantioselective metal-catalyzed reactions. In transition metal complexes and their catalytic applications, the experimental assessment and the design of key interactions is as difficult as the prediction of the enantioselectivities, especially for flexible, privileged ligands such as chiral phosphoramidites. Therefore, the interligand interactions in cis-PdII L2 Cl2 phosphoramidite complexes were investigated by NMR spectroscopy and computations. We were able to induce a strong conformational preference by breaking the symmetry of the C2 -symmetric side chain of one of the ligands, and shift the equilibrium between hetero- and homocomplexes towards heterocomplexes because of interligand interactions in the cis-complexes. The modulation of aryl substituents was exploited, along with the solvent effect. The combined CH-π and π-π interactions reveal design patterns for binding and folding of chiral ligands and catalysts.

Low-oxidation state cobalt-magnesium complexes: ion-pairing and reactivity.

Magnesium cobaltates (Arnacnac)MgCo(COD)2 (1-3) were synthesised by reacting (Arnacnac)MgI(OEt2) with K[Co(η4-COD)2] (COD = 1,5-cyclooctadiene) [Arnacnac = CH(ArNCMe)2; Ar = 2,4,6-Me3-C6H2 (Mes), 2,6-Et2-C6H3 (Dep), 2,6-iPr2-C6H3Mes (Dipp)]. Compounds 1-3 form contact ion-pairs in toluene, while solvent separated ion-pairs are formed in THF. The effect of ion-pairing on the reactivity is illustrated by reaction of 2 with tert-butylphosphaalkyne, which affords distinct 1,3-diphosphacyclobutadiene complexes. The heteroleptic sandwich complex [(Depnacnac)MgCo(P2C2tBu2)]2 (4) is selectively formed in toluene, while the homoleptic bis(1,3-diphosphacyclobutadiene) complex [(Depnacnac)Mg(THF)3][Co(P2C2tBu2)2] (5) is obtained in THF. Complex 4 is a precursor to further unusual phosphaorganometallic compounds. Substitution of the labile COD ligand in 4 by white phosphorus (P4) enabled the synthesis of the phosphorus-rich sandwich compound [(Depnacnac)MgCoP4(P2C2tBu2)]2 (6). The heterobimetallic complex (Cp*NiP2C2tBu2)Co(COD) (7) was isolated after treatment of 4 with Cp*Ni(acac) (Cp* = C5Me5, acac = acetylacetonate).

Photocatalytic Arylation of P4 and PH3 : Reaction Development Through Mechanistic Insight.

Detailed 31 P{1 H} NMR spectroscopic investigations provide deeper insight into the complex, multi-step mechanisms involved in the recently reported photocatalytic arylation of white phosphorus (P4 ). Specifically, these studies have identified a number of previously unrecognized side products, which arise from an unexpected non-innocent behavior of the commonly employed terminal reductant Et3 N. The different rate of formation of these products explains discrepancies in the performance of the two most effective catalysts, [Ir(dtbbpy)(ppy)2 ][PF6 ] (dtbbpy=4,4'-di-tert-butyl-2,2'-bipyridine) and 3DPAFIPN. Inspired by the observation of PH3 as a minor intermediate, we have developed the first catalytic procedure for the arylation of this key industrial compound. Similar to P4 arylation, this method affords valuable triarylphosphines or tetraarylphosphonium salts depending on the steric profile of the aryl substituents.

A Structural Diversity of Molecular Alkaline-Earth-Metal Polyphosphides: From Supramolecular Wheel to Zintl Ion.

A series of molecular group 2 polyphosphides has been synthesized by using air-stable [Cp*Fe(η5 -P5 )] (Cp*=C5 Me5 ) or white phosphorus as polyphosphorus precursors. Different types of group 2 reagents such as organo-magnesium, mono-valent magnesium, and molecular calcium hydride complexes have been investigated to activate these polyphosphorus sources. The organo-magnesium complex [(Dipp BDI-Mg(CH3 ))2 ] (Dipp BDI={[2,6-i Pr2 C6 H3 NCMe]2 CH}- ) reacts with [Cp*Fe(η5 -P5 )] to give an unprecedented Mg/Fe-supramolecular wheel. Kinetically controlled activation of [Cp*Fe(η5 -P5 )] by different mono-valent magnesium complexes allowed the isolation of Mg-coordinated formally mono- and di-reduced products of [Cp*Fe(η5 -P5 )]. To obtain the first examples of molecular calcium-polyphosphides, a molecular calcium hydride complex was used to reduce the aromatic cyclo-P5 ring of [Cp*Fe(η5 -P5 )]. The Ca-Fe-polyphosphide is also characterized by quantum chemical calculations and compared with the corresponding Mg complex. Moreover, a calcium coordinated Zintl ion (P7 )3- was obtained by molecular calcium hydride mediated P4 reduction.

Insights Into the Micelle-Induced ß-Hairpin-to-α-Helix Transition of a LytA-Derived Peptide by Photo-CIDNP Spectroscopy.

A choline-binding module from pneumococcal LytA autolysin, LytA239-252, was reported to have a highly stable nativelike ß-hairpin in aqueous solution, which turns into a stable amphipathic α-helix in the presence of micelles. Here, we aim to obtain insights into this DPC-micelle triggered ß-hairpin-to-α-helix conformational transition using photo-CIDNP NMR experiments. Our results illustrate the dependency between photo-CIDNP phenomena and the light intensity in the sample volume, showing that the use of smaller-diameter (2.5 mm) NMR tubes instead of the conventional 5 mm ones enables more efficient illumination for our laser-diode light setup. Photo-CIDNP experiments reveal different solvent accessibility for the two tyrosine residues, Y249 and Y250, the latter being less accessible to the solvent. The cross-polarization effects of these two tyrosine residues of LytA239-252 allow for deeper insights and evidence their different behavior, showing that the Y250 aromatic side chain is involved in a stronger interaction with DPC micelles than Y249 is. These results can be interpreted in terms of the DPC micelle disrupting the aromatic stacking between W241 and Y250 present in the nativelike ß-hairpin, hence initiating conversion towards the α-helix structure. Our photo-CIDNP methodology represents a powerful tool for observing residue-level information in switch peptides that is difficult to obtain by other spectroscopic techniques.